0-32.5m/s allows us calibrate any

size vane also hot wire and Pitot

tube type anemometers

Flow Volume 0-5500m3/H

UKAS Pressure/Vacuum

(Gas/Gas only 0-70 bar, Hydraulic & Oil free)

- 0.01 Pascal’s to 30000PSI -

We calibrate pressure gauges,

indicators, micro manometers

and many more to UKAS standards!

Click here to enquire...

We have capabilities to measure from 1000V to 120,000V 

We have capabilities to supply 0 to 100kV dc, and 0 to 50kV ac

Calibration of ac Flash Testers, dc HiPot testers and dc Pressure test sets 

Calibrate tools with cross sectional 

diameters up to 400sqmm

We calibrate the following in-house:

Verniers, Micrometers, Calipers, DTI’s length bars, profile gauges, Test samples, Spirit Levels, Inclinometers, Height gauges, Depth gauges and many others!

Click here for more & enquire...

Customer test samples can also be measured against CMM in-house.

0-600l/min (gas compensated)

Capabilities to calibrate up to 200kN

for cable tension meters force gauges

0 to 20000ux (stability <1%)

20-50000lux <±1% stability)

solar 0-1500W/m2

0 to 95% RH @ any temperature

between 0°C and 60°C

Test a range between 10mg to 300kg

Calibrate material Thickness metes

up to 150mm, coating thickness up

to 500um

Calibration of Meggers, Loops,

RCD’s, Multifunction testers,

Check boxes & PAT testers

Calibration of loop current,

supply voltage, thermocouples,

RTD & frequency

Measure up to 8000A

Supply up to 1000A

Calibration of Dumpy levels, Laser

levels, Rotating Laser levels, Rod

Eyes, Surveying staffs, Theodolites

and Basic total Stations

(not Robotic)

70 to 130db

300Hz to 8KHz

- UKAS Accredited -

Simulation of temperature, -273°C to 1372°C

referenced back to ITS90 reference tables

any thermocouple type Source/Measure 

We can generate temperatures -100°C to 1200°C

Multi-point mapping on freezers, cold stores, incubators & ovens

0.000000001Hz to 26.5GHz (source)

Measure, is the same 1MHz & 10MHz

referenced against in house

Rubidium standard

Amplitude from 1mV to 1000V

0 to 1500Nm (Torque Measurement)

0 to 1000Nm (Torque Load)

0 to 10000Nm (Torque Multiply)

- UKAS Accredited -

ac/dc Volts source and measurement 

capabilities are referenced back to

5dgt DMM and calibrator to 1100V

ac/dc Amps, same (up to 30A)

Resistance source and measure to 10GOhms

For calibration of DMM’s, Clamp meters,

Clamp Adaptors, Power Analysers

Calibration of 2/3/4W earth Testers,

low current and high current Ohm meters/Ductor

Test range between 10mg to 750kg

Calibration of all departmental

equipment including track, 

signalling, Plant, Over Head

Line, Facilities, S & P meters,

Side wear Gauges, TPWS

Systems, TI, Aster , Frequency

meters, AWS Test units, Profile

gauges, TC Aid Testers

and many more…